#bekleben #verboten #golf #mk2

#bekleben #verboten #golf #mk2

#stickerbomb #fablab #karlsruhe

#stickerbomb #fablab #karlsruhe

One side is not white but this is only the first stage of the new design #golf #mk2

One side is not white  but this is only the first stage of the new design #golf #mk2

#golf #mk2

#golf #mk2

Batterie holder prototype #pedelec

Batterie holder prototype #pedelec

It was much work. The backwheel has more diameter. So i streched the fork about 1cm. Now the backwheel fits on the front. Its funny to hear the free run constantly :D next step mounting the motor and building a first motor controller prototype #pedelec

It was much work. The backwheel has more diameter. So i streched the fork about 1cm. Now the backwheel fits on the front. Its funny to hear the free run constantly :D next step mounting the motor and building a first motor controller prototype #pedelec

Motor mount #pedelec

Motor mount #pedelec

I give the cheap b-grade lipo from hobbyking a chance for my #pedelec

I give the cheap b-grade lipo from hobbyking a chance for my #pedelec

On the side or on top? #pedelec #diy #250w

On the side or on top? #pedelec #diy #250w

Parts for the golf 2. Since a week it won't start. The starter turns the engine but the engine dont starts. I think i have a problem with the diesel pump or filter. Maybe the pump will suck air. So i build in a check valve and i will change the diesel filter. Additional i change the suspension on the trunk door.

Parts for the golf 2. Since a week it won't start. The starter turns the engine but the engine dont starts. I think i have a problem with the diesel pump or filter. Maybe the pump will suck air. So i build in a check valve and i will change the diesel filter. Additional i change the suspension on the trunk door.

Motor for my first selfmade #pedelec. I'm owning a haibike pedelec with full #suspension and a middle motor with 250w. For city and my way to work i had bought a folding bike. This motor will drive on the front wheel who has also 3 gears, like the backwheel. The controller will be selfmade and as power source i use 2x 3s 5600mah 25C #lipo in serial.

Motor for my first selfmade #pedelec. I'm owning a haibike pedelec with full #suspension and a middle motor with 250w. For city and my way to work i had bought a folding bike. This motor will drive on the front wheel who has also 3 gears, like the backwheel. The controller will be selfmade and as power source i use 2x 3s 5600mah 25C #lipo in serial.

Old and new one :) Switched the mainboard and Prozessor of my workstation. From a core2quad q9550 to an i5 4670K. Paired with 24gb ram and a radeon R9 270. More power for CAD and gaming :)

Old and new one :) Switched the mainboard and Prozessor of my workstation. From a core2quad q9550 to an i5 4670K. Paired with 24gb ram and a radeon R9 270. More power for CAD and gaming :)

Hardware wall

Hardware wall

Something new for my hardware wall :-)

Something new for my hardware wall :-)

An older project. Bluetooth amp for the kitchen in a maximal small laser cut case. I changed the connectors, buttons, cut out a bit of the board. It works great :-)

An older project. Bluetooth amp for the kitchen in a maximal small laser cut case. I changed the connectors, buttons, cut out a bit of the board. It works great :-)

The "beep" of my old multimeter was not "noisy" enought. So i build in another 5v beeper. #multimeter #fasthack

The "beep" of my old multimeter was not "noisy" enought. So i build in another 5v beeper. #multimeter #fasthack

o/ #apa102 #fastled #segmentdisplay #arduino #fablab

o/ #apa102 #fastled #segmentdisplay #arduino #fablab

The process of making stencils, apply solder paste, place parts and reflow :-)

The process of making stencils, apply solder paste, place parts and reflow :-)

My ForX system is nearly functional. The ESP module has a #CAN Controller, i2c to 1wire bridge and 4ch 16bit adc with an #ftdi for flashing. It sticks on the CON board with headers for all busses and ios plus a #rs485 and #rs232 transceiver.

My ForX system is nearly functional. The ESP module has a #CAN Controller, i2c to 1wire bridge and 4ch 16bit adc with an #ftdi for flashing. It sticks on the CON board with headers for all busses and ios plus a #rs485 and #rs232 transceiver.

Is it to big? :D

Is it to big? :D

The second element is ready. Wiring and debugging cost 2-3 more time than placing the leds and reflowing /o

The second element is ready. Wiring and debugging cost 2-3 more time than placing the leds and reflowing /o

Instagram Image

Instagram Image

Instagram Image

Instagram Image

Har har. I want to build 4 of it. The pcbs are ready. #segmentdisplay #arduino #apa102

Har har. I want to build 4 of it. The pcbs are ready. #segmentdisplay #arduino #apa102

Apa102 strips in the reflow oven :-)

Apa102 strips in the reflow oven :-)